View and Download Asus P6T6 WS Revolution user manual online. P6T6 WS Revolution Motherboard pdf manual download. Read online or download PDF • Page 41 / • Asus P6T6 WS Revolution User Manual • Asus Motherboard. Read online or download PDF • Page / • Asus P6T6 WS Revolution User Manual • Asus Motherboard.
|Published (Last):||26 November 2010|
|PDF File Size:||6.6 Mb|
|ePub File Size:||6.3 Mb|
|Price:||Free* [*Free Regsitration Required]|
Product warranty or reolution will not be extended if: Contents Ai Tweaker menu Canadian Department of Communications. If possible, disconnect all power cables from the existing system before you add a device. Refer to the following sources for additional information and for product and software updates. Refer to the ASUS contact information.
Optional documentation Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. Conventions used in this guide To make sure that you perform certain tasks properly, revoltuion note of the following symbols used throughout this manual.
Asus P6T6 WS Revolution User Manual
Information to prevent injury to yourself when rdvolution to complete a task. Information to prevent damage to the components when trying to complete a task.
This chapter describes the motherboard features and the new technologies it supports. Before you start installing the motherboard, as hardware devices on it, check the items in your package with the list below. This rebolution OC tool lets you set new ambitions on the OC stage with an advanced and easy-to-use interface—allowing you to overclock without exiting or rebooting the OS. With the breathing-like deep blue lighting shining in regular maunal, ASUS Heartbeat makes the motherboard as vivid as life.
The motherboard uses a special design on the printed circuit board O6t6 to dissipate heat these critical components generate. Fan Xpert ASUS Fan Xpert intelligently allows users to adjust both the CPU and chassis fan rfvolution according to different ambient temperature, which is caused by different climate conditions in different geographic regions and system loading.
The actual boot time depends on the system configuration. See page for details. This chapter lists the hardware setup procedures that you have to perform when installing system components. It includes description of the jumpers revolutiin Chapter 2: Hardware connectors on the motherboard.
ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down the system and unplug the power cable before removing or amnual in any motherboard component. The illustration below revoluyion the location of the onboard LED.
The edge with external ports goes to the rear part of the chassis as indicated in the image below. Locate the CPU socket on the motherboard.
Before installing the CPU, make sure that the cam box is facing towards you and the load lever is on your left. Press the load lever with your Retention tab thumb Athen move it to the left B until it is released from the If it gets into your eyes or touches your skin, ensure to wash it off immediately and seek professional medical help.
Close the load plate Aand then push the load lever B until it snaps into the retention tab. Push down two fasteners at a time in a diagonal sequence to secure the heatsink and fan assembly in place. Hardware monitoring errors can occur if you fail to plug this connector. Disconnect the CPU fan cable from the connector manal the motherboard.
Follow the table above for recommended memory configuration. The system maps the total size of the lower-sized channel for the dual-channel or triple-channel configuration. The DIMM might get damaged when it flips out with extra force. Remove the DIMM from the socket. C1 and the black slot A2 as one set asuz Triple-channel memory configuration. Expansion slots In the future, refolution may need to install expansion cards.
The following sub-sections describe the slots and the expansion cards that they support. Make sure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. Refer to the figure below for the location of the slots. You must turn off and on the power supply or unplug and plug the power cord before rebooting the system. Read the following information before you change the jumper settings.
Rear Speaker Out port black. This port connects the rear speakers in a 4-channel, 6-channel, or 8-channel audio configuration. Line In port light blue. Line Out port lime. This port connects a headphone or a speaker. In 4-channel, 6-channel, and 8-channel configuration, the function of this port becomes Front Speaker Out. This port connects a microphone.
Side Speaker Out port gray. This port connects the side speakers in an 8-channel audio configuration. This connector supports a Trusted Platform Module TPM system, which can manjal store keys, digital certificates, passwords, and data.
A TPM system also helps enhance network security, protects digital identities, and ensures platform integrity.
The TPM module is purchased separately. These are not jumpers! Do not place jumper caps on the fan connectors! Connect one end of the chassis intrusion sensor or switch cable to this connector. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced.
Refer to the labels on the Follow the instructions in Chapter 3. The power supply should turn off after Windows shuts down. Detailed descriptions of the BIOS parameters are also provided. Managing and updating your BIOS BIOS in the future. Follow the onscreen instructions to complete the update process. Always update the utility to avail all its features.
The BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen. At the bottom right corner of a menu screen are the navigation keys for that particular menu. Use the navigation keys to select items in the menu and change the settings. The navigation keys may differ from one screen to another. For example, selecting Main a field.
P6T6 WS Revo won’t read all the memory – Memory
Allows you to set the system time. There is a separate sub-menu for each Manuap device. This will be effective only if the device is accessed through BIOS. Processor Displays the auto-detected CPU specification.
System Memory Displays the auto-detected system memory. Ai Tweaker menu The Ai Tweaker menu items allow you to configure overclocking-related items.
Take caution when changing the settings of the Ai Tweaker menu items. Incorrect field values can cause the system to malfunction. The default values of the following items revplution depending on the CPU and memory modules you install on the motherboard. The values range from to Selecting a very high DRAM frequency may cause the system to become unstable!
If this happens, revert to the default setting. Voltage, and DRAM Bus Voltage items are labeled in different color, indicating the risk levels of high voltage settings. Refer to the table on the next page for details.
Blue Yellow Purple 0. CPU Clock Skew item at the same time. Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices.
Take caution when changing the settings of the Advanced menu items. When set to [Enabled], the CPU speed is controlled by the operating system. When set to [YES] and if you install a Plug and Play operating system, the operating system configures the Plug and Play devices not required for boot.
When set to [Standard], the auss fan automatically adjusts depending on the chassis temperature. Set this item to [Silent] to minimize fan speed for quiet chassis fan operation, or [Turbo] to achieve maximum chassis fan speed. Boot menu The Boot menu items allow you to change the system boot options. This allows you to enable or disable the full screen logo display feature.
Not Installed disabled password.